Table of Contents
Advertisement
SmartStart
The SmartStart function lets you
define a time period during which your
washing machine will start automatic-
ally based on an external signal. The
appliance will start on receipt of a sig-
nal, e.g. from your energy supplier, that
indicates that the electricity tariff is
particularly economical.
This function is active when the
SmartGrid programmable function is
switched on.
The time period can be defined between
30 minutes and 24 hours. During this
period, the washing machine waits for
the external signal. If no signal is sent
during the defined period, the washing
machine starts the wash programme.
Delay start/SmartStart
Setting the time period
If the SmartGrid programming
function is activated, the function of
the sensor control changes. The
time display no longer shows the delay
start period, and instead shows the
time period in which your washing ma-
chine can be started automatically
(see the "Programmable functions"
chapter, " SmartGrid" section).
The procedure for setting this is the
same as for setting the delay start time.
Touch the sensor control.
Set the time period you want using
the or sensor controls.
Touch the Start/Add laundry sensor
control.
appears on the time display.
33
Advertisement
Table of Contents
