Checking The Tire Pressure - Toro GrandStand HDX Operator's Manual

Mower with 52in and 60in turbo force cutting unit
Table of Contents

Advertisement

Figure 52
1. Nut
6.
Tighten the nut.
7.
Check for proper tracking, and adjust the rod
as necessary.
Note:
If you are unable to achieve proper
tracking by adjusting the left control rod, contact
your Authorized Service Dealer.
8.
Check that the machine does not creep from
the neutral position with the park brakes
disengaged.
9.
Install the fuel tank, if you removed it.
10.
Install the cushion.
g405489
2. Left control rod

Checking the Tire Pressure

Service Interval: Every 50 hours/Monthly (whichever
comes first)
Maintain the air pressure in the rear tires at 83 to 97
kPa (12 to 14 psi).
Important:
Uneven tire pressure can cause an
uneven cut.
Note:
The front tires are semi-pneumatic tires and do
not require air-pressure maintenance.
40
Figure 53
g001055

Advertisement

Table of Contents
loading

This manual is also suitable for:

7250672510

Table of Contents