Installing The Stand Or Wall Mount Bracket - Hisense H50A6100 User Manual

Installing the Stand or Wall mount bracket

Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in accessory tightly.
leg
Installing the wall mount bracket (not included)
Wall mount hole pattern VESA (mm)
Wall mount screw size (mm)
Rear cover of the TV
Follow instructions provided with the Wall mount bracket.
NOTE
The diameter and length of the screws differ depending on the wall mount bracket model.
8.0-10.0mm(43"); 9.5 -11.5 mm(50"/55"/65")
leg
200 × 200 (43"/50")
300 × 200 (55")
400 × 200 (65")
M6
Wall mount bracket
(not provided)
Screw (not provided)
Spacer (not provided)
2
Screws:
M4×25(43")
M4×35(50"/55")
M5×12(65")