Troubleshooting - Inglis IE8204 Use & Care Manual

T
ROUBLESHOOTING
C
OMMON LAUNDRY PROBLEMS
Problem ...
Slow drying or clothes still wet
Lint
Static electricity
Wrinkling
Shrinking
Greasy spots/stains
Colour change
Garment damage
18
Cause ...
•
Incorrect cycle or temperature setting selected.
•
Full or clogged lint screen. (See page 15.)
•
Exhaust vent clogged, restricted, or too long. (See pages 7-8 and
Installation Instructions.)
•
Dryer located in room with temperature below 7°C (45°).
•
Load too large and bulky to dry quickly.
•
Drying heavy fabrics (denim, towels) with light fabrics (synthetics,
permanent press).
•
Fabric softener sheet blocking exhaust grill inside dryer drum.
•
Full lint screen. (See page 15.)
•
Load not properly sorted.
•
Overdrying, especially synthetic fabrics that cause lint-attracting
static electricity.
•
Load size too big or heavy.
•
Tissue or paper left in pockets.
•
Pilling (surface fuzz caused by normal wear and laundering)
attracts lint.
•
Overdrying.
•
Dryer fabric softener improperly used. See package directions.
•
Load includes synthetics, synthetic blends, permanent press, and
knit fabrics that build up static electricity.
•
Overloading.
•
Overdrying, especially permanent press and synthetic fabrics.
•
Large items balling or rolling up.
•
Clothes left in dryer at end of cycle.
•
Overdrying.
•
Fabric or garment is not designed for tumble drying.
•
Dryer settings incorrect for fabric type.
•
Care label directions not followed.
•
Dryer fabric softener improperly used. Do not add to a warm load.
•
Drying soiled items.
•
Drying dark colours with light colours.
•
Drying colourfast colours with noncolourfast colours.
•
Zippers, snaps, and hooks left open.
•
Strings and sashes not tied to prevent tangling.
•
Care label directions not followed.