Axis M1137 User Manual page 8

AXIS M11 Series
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Tone mapping slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
ABC 123
Image with WDR.
8