How to configure streaming profiles in AXIS Camera Station Recommended setup Using the 8.3MP (9:4) forensic WDR (client dewarp) @ 25/30 fps capture mode How to configure AXIS P3807-PVE How to add AXIS P3807-PVE and configure in AXIS Camera Station Recommended setup Considerations and limitations...
Configure AXIS P3807-PVE with AXIS Camera Station Introduction This document will focus on what to consider when using th e AXIS P3807-PVE Network Camera with the AXIS Camera Station, as well as, how to configure the camera and the VMS to obtain the best optimal performance for the two supported capture modes: •...
Configure AXIS P3807-PVE with AXIS Camera Station About dewarped and client dewarp capture modes To get one panoramic image from the AXIS P3807-PVE multi-sensor camera, the images from the four individual sensors are stitched. To get the final image, the image needs to be dewarped. The dewarping is done either directly in the camera or on the client.
Configure AXIS P3807-PVE with AXIS Camera Station How to add AXIS P3807-PVE to AXIS Camera Station 1. Log in to AXIS Camera Station client. 2. Go to Configuration -> Add devices 3. Enter the name of the camera in the Type to search field or click Find by IP and enter the IP address of the camera.
Page 6
Configure AXIS P3807-PVE with AXIS Camera Station 7. Select the Retention time of the recordings, define the Recording storage and the Recording method. 8. Click Install.
AXIS Camera Station uses three predefined streaming profiles: High, Medium and Low, which are automatically set for a device depending on the split view and the screen resolution used. To control the profiles used by AXIS Camera Station and the streams pulled from the camera, do these steps: 1.
Configure AXIS P3807-PVE with AXIS Camera Station When the steps above are performed, make sure that all the clients accessing the camera uses the same streaming profile in the live view. NOTE The configuration of the streaming profile assure that the AXIS Camera Station reuses the same streams for the different clients, recording methods and live views.
Done How to add AXIS P3807-PVE and configure in AXIS Camera Station To add and configure the camera to AXIS Camera Station, follow the same steps and recommendation as for 7.5MP (16:9) forensic WDR (dewarped) @ 12.5/15 fps capture mode.
To get 25/30 fps, turn off the WDR option in the camera web interface and pull one unique stream only from the camera. • When using the 8.3MP capture mode the dewarped image is not supported in the AXIS Camera Station mobile app. •...