HIKVISION TURBO HD DS-2CS58C2T-S/F User Manual page 6

2.2 Installation of Type II Camera
 Disassembling
Step 1.
Open the lock catch of camera according to
the direction of arrow on the catch.
Step 3.
Apart the main body of the camera from the
enclosure.
 Wall Mounting of Type II Camera
NOTE:
Two methods are available for wall mounting of Type II camera. The following procedure is the wall
mounting application with screws/sticker.
Step 2.
Route the cable through the cable hole. (in
the cable notch)
Base Plate
Step 2.
Take apart the base plate.
Step 1.
Attach the drill template (supplied) to the
wall.(wall mounting with screws)
Attach the sticker to the base plate and align
the notches of sticker to the screw holes.
(wall mounting with sticker)
Cable Notch