Advertisement
Initial settings
PROGRESSIVE
MODE
You can select the
progressive
mode from the
following
options.
_E,U_.GUAGE
¢_D
I
AUBIO
LANGUAGE
(_)
I
suB_E
4_D
I
ONSCREENLANGUAGE
_
I
Mo.rrOR_PE
_
I
AUTO
The unit recognizes the picture type (film or video
source) of the current disc according
to the disc
information.
•
VIDEO 1
Suitable for playing
back a video source disc with
static (inactive)
pictures.
•
VIDEO 2
Suitable for playing
back a video source disc with
dynamic
(active) pictures.
•
FILM
Suitable for playing
back a film or progressive
source
disc.
SMART
Used to playback a disc containing
both video and
film source materials.
The unit recognizes the picture
type according
to the current data.
Normally,
set the PROGRESSIVE MODE to "AUTO"
Some DVD discs may not be played back correctly
with the "AUTO"
mode. If the playback
picture is
unclear or noisy with a particular
DVD Video disc, try
to change the mode.
NOTE
• When playing back a film-source DVD Video disc with
the "PROGRESSIVE MODE" set to "FILM" "SMART" or
"AUTO" and the progressivescan made is active,the
PROGRESSIVEindicator on the front panel lights. (See
page 15.)
The "PREFERENCE 2" display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit's digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
COePRESS_O" 4_[_
AUTO
STANDBY
4_
)
SCREEN
SAVER
_ _
AV
COMPUUNK
MODE
_ _
[_
I SELECT
_ b
KEY
I
PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital
input of
other audio equipment.
STREAM/PCM
Should
be selected when you connect to the digital
input of an amplifier
to a built-in
DTS, Dolby Digital, or
MPEG multichannel
decoder.
DOLBY DIGITAL/PCM
Should
be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier
with a
built-in
Dolby Digital decoder.
The following
chart shows the relationship
between
types of playback discs and output
signals.
Playback discs
Output
STREAM/
DOLBY
DIGITAL/
PCM ONLY
PCM
PCM
DVD with 48 kHz, 48 kHz,16 bit,
16 bit linear PCM stereo linear
*-
*-
PCM
DVD with 48 kHz, 48/44.1 kHz,
20/24 bit linear
16 bit, stereo
*-
*-
PCM
linear PCM*
DVD with 96 kHz, 48 kHz, 16 bit,
linear PCM
stereo linear
*-
*-
PCM*
DVD with DTS
DTS bitstream 48 kHz, 16 bit,
stereo linear
*-
PCM*
DVD with Dolby
Dolby Digital
48 kHz, 16 bit,
Digital
bitstream
*-
stereo linear
PCM*
DVD with MPEG
MPEG
48 kHz, 16 bit,
multichannel
bitstream
stereo linear
*-
PCM
Video CD
44.1 kHz,
16 bit, stereo
*-
*-
linear PCM
Audio CD
44.1 kHz,16
bit,
4--
4-
stereo
linear
PCM
Audio CDwith DTS DTS bitstream 44.1 kHz,
16 bit, stereo
*-
linear PCM
CD-RiRWwith
No output
4--
4-
MP3
* With some DVD VIDEO discs that are not fully copy-
protected,
a 20 or 24 bit digital signal may be output.
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
46
Advertisement
