Advertisement
In the following
description,
the buttons
on the remote control
unit are mainly used, however,
you may use the
corresponding
buttons on the front panel of the unit if available.
Turning on/off the unit
Press DVD STANDBY/ON
(b/Ion the remote control
unit or press STANDBY/ON
_/I on the front panel.
OPEN
/CLOSE
<Z>
o_
36
TV/V_D_O
REPEAT_HONECCANCELR_TU_N
(Z)
(Z)
(Z)
(Z)
Tv4
Tv5
Tw
<33 <D <Z> /
6_b
DVD STANDBY/ON
_/I
STANDBY/ON
...... I_
.
.
• You can turn on the unit by pressing
the I_ button.
In this
case, the unit starts playback
if the disc is set in the disc
tray.
• If no disc is set, "NO DISC" appears on the display window.
• You can turn on the unit by pressing
the _A (OPEN/CLOSE)
button
on the front panel. In this case, the disc tray opens.
NOTE
•
Even if you press the DVD STANDBY/ON
(b/I or STANDBY/ON
(b/I button
to turn off the unit, the unit is not disconnected
from
the AC power source as long as it is connected
to the wall outlet. This state is called the standby
mode.
In this state, the unit
consumes
a very small amount
of power.
Inserting and removing discs
1 Press A (0PEN/CLOSE) to open the disc tray.
2 Place the disc in the tray.
With the label side up
• To insert an 8-cm disc, place
it in the inner recess.
3
Press A (0PEN/CLOSE) to close the disc tray.
The unit
reads
the disc information
and the corresponding
opening
display
(depending
on the disc type)
appears
on the TV screen
(See page
9).
NOTES
•
Do not load a non-playable
disc. For details
about playable
and non-playable
disc types, see page 13.
•
When
loading
a disc in the tray, be sure to position
the disc inside the recess. Otherwise,
the disc may be damaged
when the
tray is closed, or the disc may not be removed
from the unit.
•
Do not use any stabilizer
when playing
back a disc.
•
With some DVD VIDEO discs, the unit starts playback automatically
after inserting
the disc.
•
If you insert a DVD VIDEO disc whose
region
code does not match the unit,
"REGION
CODE ERROR!"
is shown
in the DVD
opening
display.
For detail about the region code, see page 13.
21
Advertisement
