Advertisement
Basic operations
Resuming playback
The unit can memorize
the position
on a disc where you interrupt
playback, and resume playback from that position
later.
• During
playback
Press.., or press DVDSTANDBY/0N(b/I on the remote control unit or STANDBY/0N(b/I on the front
panel.
The unit memorizes
the interrupted
position.
• If you interrupt playback by pressing • and then turn off the power, the memory is not cleared.
• While the disc you interrupt
playback
last time is still in the disc tray
Press_.
The unit starts playback from the position
where you interrupted
playback
last time.
To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press • while stopped.
*Turn on the unit by pressing
STANDBY/ON
(bll (on the remote control)
or (b/I (on the front panel).
NOTES
• The resume function does not work with Audio CD and MP3 discs.
• In the case of a Video CD disc with PBCfunction, the unit may resume playbackfrom a point slightly earlier or later than the
resume point you stored.
24
Advertisement
