Using Wps (Wi-Fi Protected Setup) To Connect To A Network - Yamaha MusicCast 200 Owner's Manual

Using WPS (Wi-Fi Protected Setup) to
connect to a network
A wireless LAN router (access point) equipped with a WPS button is required.
1
Press OPTION.
2
Use e/r to select
Select Network route setting>Wireless (Wi-Fi)>WPS
and follow the instructions in the display to complete
setup. You must press the WPS button the wireless router
during setup.
The + indicator glows when a connection has been
established.
qwer
ENTER
OPTION
, and press ENTER.
NETWORK
44
WPS
Wi-Fi Protected Setup (WPS) is a standard established by
the Wi-Fi Alliance to allow for easy establishment of a
wireless network.
WPS cannot be used when a network cable is connected to the
unit.
A wireless connection may not be established if the unit and the
wireless LAN router (access point) are too far apart. If you experience
difficulty establishing a wireless connection, position the unit and
the wireless router (access point) closer to each other.
Other features