Wired Network Connection - Yamaha MusicCast 200 Owner's Manual

Wired network connection

For a wired network connection, connect a standard shielded twisted pair (STP) network cable (straight, category 5 or higher;
commercially available) to the NETWORK jack on the rear panel.
1
Press OPTION.
2
Use e/r to select
Select Network route setting>Wired and follow the
instructions in the display to complete setup.
qwer
ENTER
OPTION
, and press ENTER.
NETWORK
43
When a router that does not support DHCP is used, select
address setting in the option menu to configure network settings
( p. 38).
To configure your router's subnet mask manually, apply the same
subnet mask used by this unit to all devices ( p. 38).
Other features
>IP
NETWORK