Panel And Handle Profile - 130 Degree Door Opening - Sub-Zero 685 Planning Information

Planning Information
Built-In Model 685
P A N E L A N D H A N D L E P R O F I L E – 1 3 0 ˚ D O O R O P E N I N G
SUB-ZERO UNIT
DOOR CLOSED
APPROX
PROFILE OF
STAINLESS
STEEL DOOR STANDARD
AND HANDLE FRAMED
FULL-LENGTH
HANDLE
OPTIONAL
FRAMED EXTENDED
FULL-LENGTH HANDLE
The full-scale illustration above shows the panel
and handle profile of a 130˚ door opening with
2" (51) filler strip for framed applications.
Interference of door panels with handles at
maximum door swing may require the use of an
optional 90˚ door stop available through your
Sub-Zero dealer.
*Approximate thickness of wrapped
stainless steel door.
Dimensions in parentheses are in
millimeters unless otherwise specified.
130˚ DOOR OPENING
WITH 2" (51) FILLER STRIP
(TOP VIEW)
FILLER STRIP
2"
(51)
ALLOW FOR FILLER LAP
BEHIND FLANGE
MAIN FRAME
DOOR OPEN @ 130˚
To obtain local dealer information, visit the
Locator section of our website, subzero.com.
The full-scale illustration on the following page
lets you see what considerations you need to
make for any overlay panel applications, and
how they may interact with adjacent cabinets
and/or countertops.
SUB-ZERO UNIT
OVERLAY PANEL
3/4" (19) THICK
(NOMINAL)
HINGE
15