Husqvarna 330iK Operator's Manual page 4

IMPORTANT
SAFETY
INSTRUCTIONS
Read all instructions
WARNING:
the approved accessory manual
together with this power unit's
manual.
WARNING:
gardening products, basic safety
precautions should always be
followed to reduce the risk of fire,
electric shock, and personal injury,
including the following:
General power tool safety warnings
WARNING:
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result
in electric shock, fire and/or serious
injury.
• Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Personal safety
• Stay alert, monitor what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
4
Make sure to read
When using electric
Read all safety
of drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the OFF-position before
connecting to a power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
• Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught
in moving parts.
• If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
• Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool safety
principles.A careless action can cause
severe injury within a fraction of a second
Power tool use and care
• Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
• Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool
before making any adjustments, changing
2094 - 001 - 04.08.2023