Husqvarna 330iK Operator's Manual page 10

To do a check of the keypad
• Push and hold the power button (A).
B
a) The product is on when the LED (B) is
on.
b) The product is off when the LED (B) is
off.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental
start. When you push the power trigger
lockout (A) forward, it releases the power
trigger (B). When you release the handle, the
power trigger and the power trigger lockout
move back to their initial positions.
A
1. Make sure that the power trigger is locked
when the power trigger lockout is in its
initial position.
10
A
B
2. Push the power trigger lockout (A) forward.
Make sure that it moves back to its initial
position when you release it.
3. Make sure that the power trigger and the
power trigger lockout moves freely and that
the return spring works correctly.
4. Start the product. Refer to
product on page 13 .
5. Apply full power.
6. Release the power trigger lockout and
make sure that the cutting attachment
stops fully.
Safety instructions for assembly
WARNING:
unit manual together with approved
accessory manual.
• Remove the battery from the product
before you assemble the product.
• Use the approved protective gloves.
• A damaged or incorrect guard can cause
injury. Do not use a cutting attachment
that does not have an approved guard
attached.
• Make sure that you assemble the cover
and shaft correctly before you start the
product.
• If a harness is supplied with the
attachment, the harness must be correctly
A
To start the
Read this power
2094 - 001 - 04.08.2023