Interior Lights - Audi R8 Spyder 2011 Owner's Manual

58 Clear v ision
Turn signals and high beam lever
The lever is used to operate the turn signals
and the high beam as well as the headlight
flasher .
Fig. 66 Turn signal and high beam lever
The turn s ignal and high beam leve r has the
following functions:
Turn signals ¢
c::>
"" Lift the lever up all the way¢
fig.
66 to use
the right turn s ignals @ , or push the lever
down all the way to use the left turn signals
@.
""Move the lever (up or down) just to the point
of resistance to use the turn signals for as
long as you need them, for example when
changing lanes.
"" Briefly move the lever up or down ju st to the
po int of resistance and then release it to
flash the turn signals
three times in succes-
sion.
This Convenience turn signal function
must be activated in the menu display
¢
page 24.
High beam [D
"" Push the lever forward
@
to switch on the
high beam.
"" Pull the lever back towards you to switch off
the high beam.
Headlight flasher [D
"" Pull the lever toward the stee ring wheel @
to use the headlight flasher.
Notes on these features
- The
turn signals
only work with the ignition
switched on. The ind icator lights
II
or
II
in
t he instrument cluster¢
page 14
also blink.
- After you have turned a corner, the turn sig-
na l switches off automatically .
- The
high beam
works only when the head-
lights are on . The ind icator light . in the
instrument cluster illuminates when the
high beams are on.
- The
headlight flasher
works on ly as long as
you ho ld the lever - even if there a re no
lights switched on. The ind icator light . in
the instrument cluster illuminates when you
use the headlight flasher.
(D
Note
Do not use the high beam or headlight
flasher if you know that these could be
blinding oncoming traffic.
Interior Lights
Interior light s
The interior lights include the reading lights
for the driver and the front passenger.
Fig. 6 7 Section from headliner: Interior lights
Activating door contact circuit
.,. Press the button @ . The LED in the button
illumi nates.
Deactivating door contact circuit
"" Press the button @ . The LED in th e button
goes out.
Front reading lights
~
"" Press one of the switches @ to turn the
right or left reading light on or off.
With the door contact circuit, the interior
lights tur n on as soon as you unlock the vehi-
cle or open the doors. The interior lights are
Ill>