Huawei SUN2000-50KTL-M0 User Manual page 65

SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
Figure 5-19 Measuring voltage
● If the voltage is a negative value, the PV string is of reversed polarity. Correct
● If the voltage is greater than 1100 V, too many PV modules are configured to
Step 3 Pull out the blue dustproof plugs from the ends of the DC input connectors.
Before performing
Step 4 Insert the positive and negative connectors into the corresponding positive and
negative DC input terminals of the SUN2000 until they snap into place.
After the positive and negative connectors snap into place, pull test to the DC
input power cable is recommended.
Issue 11 (2024-02-02)
NO TICE
before connecting this string to the SUN2000.
the same string. Remove some PV modules.
WARNING
Step
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4, ensure that the two DC switches are OFF.
5 Electrical Connections
57