Huawei SUN2000-50KTL-M0 User Manual page 100

SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
Figure 7-5 Grid parameters (special user)
----End
Parameter List
No. Parameter
1 Grid code
2 Output mode
3 PQ mode
4 Auto start upon
grid recovery
5 Grid connection
duration after
power grid
recovery
Issue 11 (2024-02-02)
Description
Set this parameter based on the grid
code of the country or region where the
SUN2000 is used and the SUN2000
application scenario.
Indicates whether the SUN2000 output
has a neutral wire.
If this parameter is set to PQ mode 1,
the maximum active power equals the
maximum apparent power. If it is set to
PQ mode 2, the maximum active power
equals the rated active power.
Specifies whether to allow the SUN2000
to automatically start after the power
grid recovers.
Specifies the waiting time for SUN2000
restart after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
N/A
Supported by the
SUN2000-50KTL-M0
and SUN2000-60KTL-
M0 only.
N/A
N/A
92