Table of Contents
Advertisement
or if you do not want to exceed a specifi ed
speed for winter t ires.
The speed warning 2 symbol,
1mj
(USA mod-
e ls)/
laJ
(Canada models) appears in the dis-
play when you exceed the stored speed lim it.
Unlike war ning 1, it will not go out until the
ve hicle speed drops be low the stored speed
limit.
Sett ing speed warning 2
c:>
page
2 7 .
(0
Tips
Even t ho ugh your vehicle is equipped with
a speed warning sys t em, you shou ld st ill
watch the speedomete r to make sure you
are not dr iving faster than the speed limit.
Speed warning 1: setting a speed limit
Warning threshold 1 is set by the button.
Fig. 23
Section of instr ume nt cluster: Set/Check but-
to n
Storing the maximum speed
• Drive at the desi red max imum speed.
• Press the knob button ¢
fig. 23
until the
speed wa rning symbo l
[I
(USA
models)l[°i
(Ca nad a mode ls) a ppears .
Resetting the maximum speed
• Drive the vehicle at a speed of at least
3 mph (5 km/h)
• Press the knob fo r more than 2 seconds.
The speed warning symbo l
[I
(USA mode ls)/
t•)
(Canada models) will appear briefly in t he
d isp lay when you re lease the button to indi-
cate that t he max imum speed has been stored
successfully.
Dr iv er in f ormation
system
2 7
The maximum speed rema ins stored until it is
changed by pressing the button again brief ly
or unti l it is deleted by a lengthy push on the
button .
Speed warning 2: setting a speed limit
Switches in the wiper arm are used to operate
warning threshold 2.
-----
@
Fig. 24
Wiper lever: Trip comp uter co ntrols
To store maximum speed
• Turnoff the ignit ion .
• Briefly press the button in the instrument
cluste r
c:>
page 2 7, fig. 23 .
The odomete r
and the digital clock a re now illum inated .
• Press t he button for at least 2 se conds. The
curren tl y st o red max imum spee d appears in
the display or t he crossed out symbol for
warni ng thresho ld 2, if no maximum speed
was set previously .
• Press the f unction selector switch in the
wiper lever @
c:>
fig. 24
up or down to
change the set va lue. Values run up or down
in steps of 6 .2 mph (10 km/h) .
To delete maximum speed
• Turnoff the ignit ion.
• Briefly press the button in the instrument
cluster
c:>
page 2 7, fig. 23 .
The odometer
and the digital clock are now illum inated .
• Press the button fo r at least 2 seconds . The
current ly sto red max imum speed appears in
t he display .
• Press the reset button in the wipe r lever @
c:>
fig. 24
unt il t he crosse d out speed warn-
ing sym bol for warning thresho ld 2 a ppears
in the display.
~
Advertisement
Table of Contents
