Table of Contents
Advertisement
Miscellaneous
Problem
■ The wireless controller doesn't
work.
B The camera malfunctions.
■ The camera doesn't remember the
date and time (or other settings)
when it's turned off and back on
again.
B There are air bubbles inside the
lens.
Cause and/or what to do about it
• The batteries are dead or not inserted.
• External interference may cause the
camera's microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source and the backup battery:
camera functions return to their
default setting.
• You haven't installed the backup
battery (p. 67).
• You need to change to a new backup
battery because it is dead (p. 67).
• This is unlikely, but may happen if
you use the camera in places where
the air pressure is low, in an airplane
for example. The bubbles will
disappear a week or so after you
return the camera to normal
atmospheric pressure.
76
Advertisement
Table of Contents
