Preview and Recording
TOTAL/0:43:56
PLAY
SETUP
0:10:42
CUT
IK
CUT OUT
1;24:28+ 0:45:10
0:47:54+ 0:55:37
hhd
►SET DEL HE
START
CLR
TOTAL/0:43:56
PLAY
SETUP
0:10:42
CUT
IN
CUT OUT_
sSHS
HIED
SET DEL PRV
HH:II
CLR
I Previewing the editing program (PRV function)
-
____
-
You can preview the editing program. The preview function plays the whole
program, automatically pausing at the "cut-in" and "cut-out" of each scene to help
editing,
1. Use the arrow keys (or the FlexiZone controller) to move down the
screen to the bottom line, and then across to the PRV function.
2. Press the EXECUTE button (or the FlexiZone AE Lock button).
• The camera will now play all the scenes in the order you have programmed
them.
♦ In PRV mode the tape starts a little before each "cut-in" point. It will pause
for two seconds precisely at the "cut-in" point. It pauses again at the"cut~
out" point.
Running the editing program (START function)
1. Make sure the VCR is ready to record and on pause.
2. Use the arrow keys (or the FlexiZone controller) to move down the
screen to the bottom line, and then across to the START function.
3. The editing program starts when you press the FlexiZone AE Lock
button.
• The camera automatically records the scenes you selected onto the tape in
the VCR.
_
• You are now unable to use the wireless controller (S Mai (sensor off)
appears in the display).
56