Canon UC-V30 Hi8 Instruction Manual page 64

8mm video camcorder
Table of Contents

Advertisement

The VCR should start to record for a few seconds, and REC appear in the
display and on the TV screen. Then it will automatically pause and PAUSE
appear in the display and on screen.
If not, then the setting is still not right. Try the next setting.
5. To exit, move down to RETURN and press the EXECUTE button
(or the FlexiZone AE Lock button). (To totally exit the Editing
Function, press the EDIT button.)
VCR Settings
The camera's Auto Editing Function can remotely control almost all brands
and models of VCR. VCR remote control signals vary depending on model
and brand. First, choose the right setting for your VCR. The number indicates
the VCR brand. The letter indicates the set of signals.
Brand
Settings
Brand
Settings
Brand
Settings
Canon
1-Ato 1-B
Pioneer
11
Thomson
18-A to 18-C
Aiwa
2-A to 2-C
Sanyo
n
12-A to 12-C
Saba
Akai
3-A to 3-C
Fisher
J
Nordmende _
Fujitsu
4
Sharp
13-A to 13-C
Ferguson
19-A to 19-C
Funai
5
Sony
14-A to 14-F
Grundig
20-A to 20-C
Hitachi
6-A to 6-B
Toshiba
15-A to 15-B
Nokia
21-A to 21-C
JVC
7-A to 7-C
GE
16-A to 16-B
Telefunken
22-A to 22-B
Mitsubishi
8-A to 8-D
RCA
Zenith
23
NEC
9-A to 9-D
Magnavox
17-A to 17-B
Samsung
24-A to 24-B
Panasonic ~
10-A tolO-G
Philips
18-A to 18-C
GoldStar
25
Blaupunkt
Seleco
Quasar
Rex
as of May 1999
nutes.
• Once you find the correct setting, do not change it unless you change VCRs.
• See p. 57 for details of the "cut-in'* and "cut-out" adjustments.
• If you try all the numbers and letters, but the VCR has still not started to record.
- Check that the VCR is ready to record, and on pause.
- Check that the VCR can receive signals from where the camera is, and that
nothing is blocking the signals.
- Go back and try to set it again.
_____
• If your brand of VCR is not on the chart, or you cannot find the correct
setting, try all the numbers with the ◄ / ► keys (or the FlexiZone
controller) until the VCR starts to record.
• It is unlikely, but you may have a VCR the Editing Function cannot control.
If so, use the Simple Editing method on p. 62.
_ _

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uc-v20 hi8Uc-v300 8Uc-v200 8

Table of Contents