Table of Contents
Advertisement
Editing Features
Audio Dubbing using the
roma you begin E
Built-in M icrophone
: ena sch
oll tape to be dubbed.
The original sound can be replaced with
new sound using the built-in Palmcorder
microphone.
The original sound is recorded
on ST (Stereo) 1, and the new
sound will be recorded on ST
(Stereo) 2.
The original sound is replaced
with the new sound.
e Select 12 bit if you do not want the
origina! sound to be completely replaced
during an audio dub.
+ With tape containing both 12 bit and
16 bit audio, please note that if dubbing is
started in a 16 bit portion, the 12 bit audio
will also be completely replaced.
Built-in Microphone
1 Set POWER to VCR.
a
* If you have the optional Remote
Control, you can set the Palmcorder to
stop automatically at a specified point
on the tape. See "Memory-Stop
Editing" on page 44.
Press » (PLAY). Then press
Il (PAUSE) where you want dubbing to
begin.
When using the Palmcorder only
3 Press MENU to display the VCR mode
menu screen.
Rotate JOG KEY to select ¡1348 [9]1]3,
then press JOG KEY to display the
VCR REC MODE menu screen.
Rotate JOG KEY to select
, and then press JOG KEY to
select ON.
. The Palmcorder will go to Stand By
mode, and "A.DUB IP indication
appears in the EVF or the LCD
monitor. Go to step 4.
When using the Optional Remote
Control only
3 Press A.DUB on the Remote Control.
e The Palmcorder will go to Stand By
mode, and "A.DUB IP indication
appears in the EVF or the LCD
monitor. Go to step 4.
(Continued on next page.)
43
m
o
=
5
(Q
T
D
9
>
c
=
©
0
3A.DUB
Advertisement
Table of Contents
