Panasonic Digital Palmcorder Multicam PV-DV92 Operating Instructions Manual page 8

Before Using
Using the Built-in Light Before you begin
To brighten the natural colors in a scene. * Connect the Palmcorder to a power
source. (pp. 13, 14)
+ Set POWER to CAMERA or M-CARD.
1 Hold down LIGHT for more than 0.7
seconds to turn ON or OFF.
*D" will appear on the screen.
Built-in Light
* Using Light reduces battery time.
* Provide adequate ventilation if using
Light in a hot environment for a long time.
* Set LIGHT to OFF when not in use.
e When replacing the bulb, see page 91.
This light becomes hot during operation.
Make sure nothing covers the light during
operation.
Remote Control (Optional)
You can operate the major functions of your Palmcorder from up to approximately 5 m
(16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder
and press the desired buttons (Remote Sensor is located under the lens).
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
Controlled Functions
* Rec/Pause (p. 17) + FF/Search (p. 33)
e Tele (Zoom) (p. 20) e REW/Search (p. 33)
* Wide (Zoom) (p. 20) » Pause/Select (pp. 15, 16, 35)
e Date/Time (p. 108) ¢ Stop/Set (pp. 15, 16, 31, 46)
* Reset (p. 44) ¢ Slow/Frame Advance (Forward)
¢ PhotoShot (p. 19) (pp. 34, 35)
* Display On TV (p. 38) e Slow/Frame Advance (Backward)
* Counter/Time Code (p. 109) (pp. 34, 35)
* Audio Dubbing (p. 43) * Index Search (Forward) (pp. 35, 36)
» Record (p. 46) * Index Search (Backward) (pp. 35, 36)
+ Menu (p. 16) e Speaker Volume (p. 32)
+ Play (p. 31)
For assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com