Panasonic Digital Palmcorder Multicam PV-DV92 Operating Instructions Manual page 18

Camera Recording
Using the LCD Monitor
The LCD (Liquid Crystal Display) monitor 1
can be used while recording. Press LCD-OPEN to unlock the LCD
monitor.
2 Swing the LCD monitor fully open
and adjust the viewing angle.
e The LCD monitor will automatically
turn on.
e When the LCD monitor is completely
closed, it will shut off automatically to
save power.
+ Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Please refer to "To adjust the LCD/
ae BRIGHTNESS or COLOR"
elow.
3 Start recording.
« Using the LCD monitor will reduce battery
operating time.
e Close the LCD monitor completely when
not in use.
To adjust the LCD/EVF
BRIGHTNESS or COLOR
1 Press MENU to display the main menu
screen.
1 3 9
2 Rotate JOG KEY to select MAA
MÉNU Eu from the main menu screen.
(Menu OSD: pp. 105, 107)
2,3,4
JOG KEY 3 Press JOG KEY to display the LCD/
EVF SETTING screen.
4
on Press JOG KEY to select LCD
DE IGH BRIGHTNESS, LCD COLOR, or
-SELECT:PusH Joa KEY EVF BRIGHTNESS, then rotate JOG
SET ¡ROTATE JOG KEY
-EX(T > PUSH MENU KEY KEY to adjust.
5 Press MENU twice to exit this mode.
1 8 For assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts O panasonic.com