Connecting Two Vcrs - Sony KPR-41EXR95 Operating Instructions Manual

Connecting two VCRs (equipped with an S video output jack) for tape editing
<=: Signal flow (Rear of projection TV)
audio output £5 gb MONITOR OUT
YC-15V/30V
(not supplied)
RK-74A
(not supplied)
(for playback)
Preparing for use/Operating the equipment
Same as p. 15.
* It is not necessary to connect to the MONITOR OUT S VIDEO
jack to receive the S video input signal. You can make the
connection as shown above, or connect the MONITOR OUT
jacks to the VCR for recording, using the VMC-810S/820S
connector (not supplied).
S VIDEO+
YC-15V/30V
lied
(not supplied)
(not supplied)
(for recording)
Note
Do not change the input signal while editing through MONITOR
OUT, or the output signal will also change.
Caution
Video tapes and other materials may be copyrighted.
Unauthorized recording of such material may be contrary
to the provisions of the copyright laws.
Chapter 1: Setting Up | 17
woudjnby 1919 Gugssuueg «=, eA oor