Watching Two Programs Pip - Sony KP-53HS10 Operating Instructions Manual

Watching Two
Programs at One Time
-- PIP
The Picture-in-Picture (PIP) feature allows you to
view two channels simultaneously, one in the full
size "main" picture and one in a smaller "window"
picture.
You can move the window picture to any location
on the screen (Free Layout PIP).
Note:
• The PIP feature is not available for the inputs
from VIDEO 5 (DTV) IN.
The symbol ",_" or
"<," indicates which
picture's TV channel
or input source can
bechanged. ,_ /
Main 4_
""* _ 6- +r+l
Window picture
The symbol "J_"
indicates which
picture's sound is
being received.
TV channel or
input-source
mode for the
-"main picture (It
will dim in
about 3
seconds.)
X TV channel or
input-source
mode for the
window picture
(It will dim in
about 3
seconds,)
Using the yellow labeled buttons
for PIP operations
R E['IzT_ TO l ttE
1LLL.S7RATION OF TtIE
REMOTE CONTROL ON 77tE INSIDE FRONT
COVER Of' Tills MANUAL AS YOU RE17EW TIlE
FOLLO WING DESCRIP170N
Tip"_ °
If you press RESET in PIP mode, the window picture
will move to the bottom Hght (J_tctory-preset
location ).
Press to display a window picture.
Each time you press this button, the picture size
will change (1/4 _ I/9 ---* 1/16).
t I
Press (_ to close the window picture.
+
Press to change the location of the window picture
(counterclockwise) around the main picture.
To change the location of the window picture,
move the joystick in any direction and release it
when the picture is in the desired location.
ACTIVE
Press to select either the main or window picture in
order to change the TV channel or video source
using the white labeled buttons below. The symbol
",_'" (or "_,") will appear to indicate which
picture's channel or input mode can be changed.
W/VIDEO
-- (white labeled button) ....
Press repeatedly to scroll through the available
video inputs for the picture on which the symbol
",1€' (or ".q,") is displayed. (see "TV/VIDEO" on
page 26)
CH
®.®o,'oM"
Press to select the TV channel on which the
s) mbol ".I," (or "<.") is displayed. (for details, see
"Watching the TV" on page 25)
Press to change between the VHF/UHF input and
the AUX input for the picture on which the symbol
",*," (or "4,") is displayed.
28