Wolf Sub-Zero ICBIG15/S Design Manual page 33

W O L F W A R M I N G D R A W E R S
I N S T A L L A T I O N S P E C I F I C A T I O N S
Model ICBWWD30 with Integrated Drawer Front
Undercounter Installation
Overlay Application
51 mm 51 mm
x DIMENSION
ANTI-TIP BLOCK WILL VARY*
260 mm
OPENING
251 mm
HEIGHT
914 mm
STANDARD
610 mm min
FLOOR TO
OPENING DEPTH
COUNTER
HEIGHT
610 mm min
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
**Overlap of decorative drawer face will vary depending on the size of the custom panel.
Flush Inset Application
51 mm 51 mm
x DIMENSION
ANTI-TIP BLOCK WILL VARY*
260 mm
251 mm OPENING
HEIGHT
914 mm
STANDARD
610 mm
+ THICKNESS
FLOOR TO
OF DRAWER FACE
COUNTER
FOR OPENING DEPTH
HEIGHT
635 mm min
CABINET DEPTH
*Allow enough room for placement of anti-tip block.
Installation below 762 mm Built-In Single Oven
610 mm min
CABINET DEPTH
610 mm min 691 mm
51 mm 51 mm
x
ANTI-TIP BLOCK
260 mm
251 mm 251 mm
OPENING
HEIGHT
38 mm
min*
610 mm min 610 mm
OPENING DEPTH
FOR OPENING DEPTH
OVERLAY APPLICATION FLUSH INSET APPLICATION
*Dimension may increase depending on the size of the drawer front panel.
838 mm
RECOMMENDED CABINET WIDTH
762 mm min
102 mm
ALLOW FOR
OVERLAP OF
DECORATIVE
749 mm
DRAWER FACE
ON ALL SIDES** OPENING WIDTH
838 mm
MINIMUM CABINET WIDTH
102 mm
749 mm
OPENING WIDTH
635 mm min
CABINET DEPTH
610 mm min 691 mm
51 mm 51 mm
x
ANTI-TIP BLOCK
260 mm
OPENING
HEIGHT
38 mm
min*
+ THICKNESS
OF DRAWER FACE
NOTE: Refer to the built-in 762 mm single oven specifications for electrical location.
127
E
mm
127 mm min
BOTTOM
OF OPENING
TO FLOOR
127
E
mm
127 mm min
BOTTOM
OF OPENING
TO FLOOR
838 mm
CABINET WIDTH
724 mm
762 mm OVEN
OPENING WIDTH
127
E
mm
102 mm
749 mm
WARMING DRAWER
OPENING WIDTH
S P E C I F I C A T I O N S
Model ICBWWD30 with
Integrated Drawer Front
Overall Width 746 mm
Overall Height 257 mm
Overall Depth 597 mm
(behind frame)
Interior Capacity 45 L
Min Cabinet Width 838 mm
Min Cabinet Depth
Overlay 610 mm
Flush Inset 635 mm
Min Base Support 91 kg
Opening Width 749 mm
Opening Height 260 mm
Opening Depth* 610 mm
Min Panel Size (W x H)
Overlay 762 mm x 264 mm
Flush Inset 746 mm x 257 mm
Min Panel Thickness 16 mm
Electrical Supply 220-240 V AC, 50/60 Hz
15 or 20 amp circuit
Heating Element 850 W
Shipping Weight 45 kg
*For flush inset application, add thickness of
drawer face to opening depth.
Unit dimensions may vary to ± 3 mm.
I N S T A L L A T I O N
O P T I O N S
Model ICBWWD30 with
integrated drawer front
may be installed above or
below any Wolf built-in
oven, or below an electric
or gas cooktop, provided
the warming drawer is fully
enclosed, top and bottom,
with a minimum base
support of 91 kg. Refer to
the cooktop and oven
sections for additional spec-
ifications. It may also be
installed next to or above
another Model ICBWWD30.
Model ICBWWD30 with
integrated drawer front
may be installed in combina-
tion with a 762 mm or 914
mm single oven.
Refer to the installation
instructions provided for
detailed specifications.
These instructions can also
be found on our website,
wolfappliance.com.
33