Wolf Sub-Zero ICBIG15/S Design Manual page 32

S P E C I F I C A T I O N S
Model ICBWWD30 with
Stainless Steel Drawer Front
Overall Width 759 mm
Overall Height 260 mm
Overall Depth 597 mm
(behind frame)
Interior Capacity 45 L
Cabinet Width 838 mm rec
762 mm min
Cabinet Depth 610 mm min
Min Base Support 91 kg
Opening Width 727 mm
Opening Height 232 mm
Opening Depth 606 mm
Electrical Supply 220-240 V AC, 50/60 Hz
15 or 20 amp circuit
Heating Element 850 W
Shipping Weight 45 kg
Unit dimensions may vary to ± 3 mm.
I N S T A L L A T I O N
O P T I O N S
Model ICBWWD30 with
stainless steel drawer front
may be installed above or
below a Wolf 762 mm single
or double oven, or below an
electric or gas cooktop,
provided the warming
drawer is fully enclosed,
top and bottom, with a
minimum base support of
91 kg. Refer to the built-in
oven and cooktop sections
for additional specifications.
It may also be installed next
to or above another Model
ICBWWD30.
Model ICBWWD30 with
stainless steel drawer front
may be installed in combina-
tion with a 762 mm single
oven.
Refer to the installation
instructions provided with
the stainless steel drawer
front for detailed specifica-
tions. These instructions
can also be found on our
website, wolfappliance.com.
Dimensions will vary
according to the specific
installation.
32
I N S T A L L A T I O N S P E C I F I C A T I O N S
Model ICBWWD30 with Stainless Steel Drawer Front
Undercounter Installation
51 mm 51 mm
x
ANTI-TIP BLOCK
232 mm
OPENING
HEIGHT
606 mm min
OPENING DEPTH
610 mm min
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
Installation below 762 mm Built-In Single Oven
610 mm min
CABINET DEPTH
691 mm
610 mm min
22 mm
PLATFORM
232 mm
OPENING
22
HEIGHT mm
606 mm min
OPENING DEPTH
PLATFORM APPLICATION ANTI-TIP BLOCK APPLICATION
DIMENSION
WILL VARY*
ALLOW FOR
16 mm
914 mm
OVERLAP OF
STANDARD DRAWER FACE
FLOOR TO ON ALL SIDES
COUNTER
HEIGHT
610 mm min
CABINET DEPTH
691 mm
610 mm min
51 mm 51 mm
x
ANTI-TIP BLOCK
232 mm
OPENING
60
HEIGHT mm
ALLOW FOR
16 mm
OVERLAP OF
606 mm min
DRAWER FACE
OPENING DEPTH
ON ALL SIDES
NOTE: Refer to the built-in 762 mm single oven specifications for electrical location.
W O L F W A R M I N G D R A W E R S
838 mm
RECOMMENDED CABINET WIDTH
762 mm min
127
E
mm
102 mm
727 mm 127 mm min
OPENING WIDTH BOTTOM
OF OPENING
TO FLOOR
838 mm
RECOMMENDED CABINET WIDTH
762 mm min
724 mm
762 mm OVEN
ROUGH OPENING
127
E
mm
102 mm
727 mm
WARMING DRAWER
OPENING WIDTH