Table of Contents
Advertisement
8.5. Connected devices
◼
Also observe the safety and operating instructions of any other devices which are connected to
the product.
8.6. Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
◼
Connect the appliance to a wall socket that can be accessed easily.
◼
As power supply, only use the supplied mains adaptor.
◼
Only connect the power adaptor to a normal mains socket connected to the public supply.
Before plugging in the power adaptor, check whether the voltage stated on the power adaptor
complies with the voltage of your electricity supplier.
◼
Never connect or disconnect power adaptors if your hands are wet.
◼
Never unplug the power adaptor from the mains socket by pulling on the cable; always use the
grips on the plug.
◼
For safety reasons, disconnect the power adaptor from the mains socket during storms.
◼
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal
electric shock! Take the following steps:
Switch off the mains voltage to the socket containing the power adapter (switch off the
>
corresponding circuit breaker or remove the safety fuse, and then switch off the
corresponding RCD protective switch).
Unplug the power adapter from the mains socket.
>
Use a new power adapter of the same design. Do not use the damaged adapter again.
>
◼
Ensure that cables are not pinched, kinked or damaged by sharp edges.
◼
Always lay cables so that nobody can trip over or become entangled in them. This poses a risk
of injury.
8.7. Repairs
◼
Repairs require specialist knowledge. Contact a professional to have the printer repaired.
◼
Only use original spare parts to repair the printer.
7
Advertisement
Table of Contents
