16.4. Cleaning roller and/or paper path
Clean the roller and paper path if you notice reduced print quality or problems with paper
detection.
1. Disconnect the printer from the power supply.
2. Open the printer cover.
3. Remove the installed paper roll.
4. Remove lose dust or foreign substance using dry cloth or cotton swabs.
5. Remove persistent adhesive foreign substances with a clean cloth or cotton swab dampened
with methanol or isopropyl alcohol.
6. Wait for the alcohol to completely evaporate before you use the printer again.
17. Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste at
the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately
from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the
WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must
be removed by end users from the WEEE in a non-destructive manner before it is handed over to
a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of
waste. Conrad provides the following return options free of charge (more details on our website):
◼
in our Conrad offices
◼
at the Conrad collection points
◼
at the collection points of public waste management authorities or the collection points set up
by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
24