Table of Contents
Advertisement
11.6. Basic Operation
11.6.1. Power On/Power Off
◼
Press the power button
◼
Press the power button
11.6.2. Feed
When the printer is on, press feed button
specified position according to the paper type you use.
In "Continuous Mode", the printer will feed a fixed distance of paper
◼
In "Label Mode", the printer will feed a whole label
◼
11.6.3. Print self-test page
The self-test checks whether the printer has any problems. There are two options to run the self-
test.
Print self-test page via FEED button
1. Check that paper is loaded properly.
2. Switch the printer off.
3. Close the top cover.
4. Press and hold the feed button
on.
The printer prints a self-test page.
>
Print self-test page via Windows® print driver
1. Install the Windows driver. Refer to Configuring printer with Windows® Label Printer Utility
for the installation procedure.
2. Print the test page using the "Print test page" function of Windows driver.
for about 1.25 seconds to switch on.
for about 1.25 seconds to switch off.
and the printer will automatically feed paper to the
and then press the power button
16
to switch the printer
Advertisement
Table of Contents
