Table of Contents
Advertisement
◼
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
8.2. Handling
◼
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
8.3. Installation
◼
Do not place the product under any mechanical stress.
◼
Protect the appliance from extreme temperatures, flammable gases, steam and solvents.
◼
Vibrations, shock and impacts can damage the printer or cause it to fall down. Install the printer
on a solid and vibration-free surface where the likelihood of shock and impact is minimal.
◼
Protect the product from high humidity and moisture.
◼
Protect the product from direct sunlight.
◼
Dust can damage the printer. Do not install the printer in dusty locations.
◼
Vibrations, shock and impacts can damage the printer to move and fall down. Install the printer
on a solid, stable and non-slip surface.
◼
Liquids can damage the printer and cause short-circuits. Keep liquids away.
8.4. Operation
The hot printer head can cause burns. Do not touch the printer head.
◼
Static discharge can damage the printer head. Do not touch the printer head.
◼
The cutter blade is sharp and can cause cuts. Do not touch the blade.
◼
Only use recommended label paper to prevent damage to the printer.
◼
Switch off the printer before you make and disconnect connections.
◼
Blocking moving parts can cause damage. Do not touch, block or pull moving parts during
operation. Do not stick objects into openings.
◼
Only use approved accessories to prevent damage.
◼
Consult an expert when in doubt about the operation, safety or connection of the product.
◼
If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
is visibly damaged,
>
is no longer working properly,
>
has been stored for extended periods in poor ambient conditions or
>
has been subjected to any serious transport-related stresses.
>
6
Advertisement
Table of Contents
