Page 1
P8701-M0 rev 08/07 Hand Pumps Instruction Manual MODELS: P8701 & P8701M SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
PRODUCT DESCRIPTION BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. These pumps have a unique two-stage hydraulic circuit allows quick displacement of hydraulic fluid under no load conditions and easy pumping in loaded conditions.
Page 3
WARNING • Study, understand, and follow all • Do not subject the pump and its components to shock loads. instructions provided with and on this • Use only approved accessories and approved hydraulic fluid. device before use. • Never attach ANY component not authorized by manufacturer. •...
Pressure may be monitored by product, its components and recognize the hazards means of an optional manifold and gauge (contact BVA associated with its use. Hydraulics). Load may be monitored by means of a load 2.
flow to reservoir closed. Hold Position. returns flow to reservoir. (b) 3-way, 3-position valve for Single Acting Cylinder (to tranfer from 4-way valve to 3-way valve, contact BVA Hydraulic Technical Sevice 888-332-6419) Port A Port A Port A Port A...
Hand Pumps Service Parts MODELS: P8701 & P8701M SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com P8701-M0 08/07 Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Hand Pumps Service Parts MODELS: P8701 & P8701M SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com P8701-M0 08/07 Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.