Series User's Manual - Winbook x1 User Manual

X series manual w/no OS 9/5/01 2:20 PM Page 90
Series
User's Manual
Installed O/S: This item allows you to set the operating system for
your unit. If you are using Microsoft Windows, this item should be
left at the default setting (which is for Windows operating systems).
If you install another operating system, you can change this setting
and it will release Windows controls of many functions (such as power
management).
Reset Configuration Data: This setting allows you to clear the extended
system configuration data. You should contact Technical Support before
using this item.
Large Disk Access Mode: This allows you to set the mode for large disk
access (your hard disk drive is considered a large disk) for your system.
If you are using a Windows-based operating system, you should use the
DOS setting. If you are using another operating system, select "Other" for
this item. This will enable the operating system to control the disk access
as needed.
Quiet Boot: If you enable this option, you will see a logo screen rather
than boot information; this setting allows for a faster boot. If you disable
this setting, you will see the comprehensive boot information during the
boot process.
Advanced Chipset Control Submenu (Figure 8.5)
Shared Video Memory: This item allows you to set the amount of system
memory that is dedicated to VGA display memory. You can adjust this
amount of display memory to fit your needs (keep in mind that increasing
the VGA memory share will reduce system memory available for program
operation). The values available are: 4MB, 8MB, 16MB, 32MB and 64MB.
90