Winbook x1 User Manual page 29

X series manual w/no OS
3. Wait until the tray stops. If the tray does not open far enough to
insert the CD, gently ease the tray out until you have enough clearance
to insert the CD.
4. Carefully place the CD (audio or data), with the label side up,
on the disc tray. (Figure 1.9)
5. Be sure to carefully center the CD and press it into place on the
loading tray. Since your WinBook notebook is meant to be portable,
the CD is secured onto the tray rather than simply resting in a recess.
6. Close the tray. Be certain that it is closed completely.
In general, your software will control the CD-ROM directly. Data CDs
are accessed via the software. Consult your software instructions for the
operations of a data CD. Windows compatible CD-ROMs will usually
have an autoplay feature that starts the program when the CD is detected.
9/5/01 2:19 PM Page 29
Figure 1.9: Loading
a CD into the drawer
Label-side up
Chapter 1: Getting Started
29