How To Manage: Error Codes - Zanussi ZOPXX8KN User Manual

The appliance does not turn on or does not heat up
Possible cause
The door is not closed correctly.
The fuse is blown.
The appliance Child Lock is on.
Components
Description
The lamp is burnt out.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.

13.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
C2 - the Food sensor is in the appliance cavity
during Pyrolytic Cleaning.
C3 - the door is not fully closed during Pyrolyt‐
ic Cleaning.
F111 - Food sensor is not correctly inserted in‐
to the socket.
TROUBLESHOOTING
Remedy
Fully close the door.
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
Refer to "Menu" chapter, Submenu for: Op‐
tions.
Remedy
Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Remedy
Take out the Food sensor.
Close the door.
Fully plug Food sensor into the socket.
71/160