Table of Contents
Advertisement
Safety instructions
Important technical information
• The device is not waterproof. Never immerse it in water or any oth-
er liquids. For information on cleaning and disinfection, please see
the instructions on page 23.
• Ensure that you do not drop the device or subject it to shocks. Pro-
tect the device against extreme temperatures, dirt, dust, powerful
sunlight, heat and cold.
• Do not use the device if you find signs of damage or any other
abnormality.
• Never open the device (except to replace the battery). If the unit
has been opened, it must be subjected to a metrological inspection
by an authorised institution.
• The use of this device in the vicinity of mobile phones, microwaves
or other devices with strong electromagnetic fields can cause mal-
functions. Maintain a distance of at least one metre from such de-
vices when using the thermometer. If you cannot maintain the min-
imum distance, check that the thermometer is working correctly
before you use it.
• If the device is not being used for an extended period of time, re-
move the battery.
• The device contains sensitive parts and must therefore be handled
with care. See the storage and transport conditions as well as the
operating conditions on page 20.
• If the device has been stored at temperatures below 10°C or above
40°C, leave it to stand at room temperature for at least 2 hours
before using it.
EN-6
Device description
2
3
1
1
Measuring sensor
2
Illuminated measuring tip
3
Display
4
START button
(start measurement)
Operating the device
4
5
6
8
7
5
MEMO button
(memory button)
6
O/I button (on/off button)
7
Battery compartment
8
MODE button
EN-7
Advertisement
Table of Contents
