Table of Contents
Advertisement
Technical information
Upon request, responsible authorities or authorised maintenance ser-
vices will receive a "test instruction for metrological inspection" from
the manufacturer.
Explanation of symbols
This product complies with Council Directive 93/42/EEC of
5 September 2007 concerning medical devices and bears
0123
the mark CE 0123 (TÜV SÜD Product Service GmbH).
Degree of protection against electric shock: TYPE BF
Consult the instructions for use
55 °C
Conditions for storage and transport
-25 °C
Ambient temperature -25 °C to +55 °C
95 %
Maximum relative humidity 15 % to 95 %
15 %
Manufacturer
IP 22
Protected against solid foreign bodies with a diameter of
12.5 mm and above, protection against dripping water.
Device serial number
Reference number = item number
Disposal
Technical equipment and batteries do not belong in
household waste. They must be disposed of at appropriate
collection and disposal points.
EN-22
• The measuring tip must be cleaned after each use! Any contami-
nation of the measuring tip will cause malfunctions and inaccurate
measurements.
• Use one of the enclosed alcohol wipes or a cotton cloth or cotton
bud moistened with alcohol (70 % isopropyl alcohol) to clean the
housing and the measuring probe.
• Make sure that no liquid enters into the thermometer itself.
• Do not use aggressive cleaning agents, solvents or benzene for
cleaning purposes. Never immerse the device in water or other
cleaning fluids.
• Make sure that the surface of the measuring sensor and the display
do not become scratched.
• After cleaning the measuring sensor with alcohol, wait five min-
utes before taking the next temperature measurement. This will
ensure that the thermometer can return to the required operating
temperature.
Cleaning and care
EN-23
Advertisement
Table of Contents
