Table of Contents
Advertisement
Starting the system air conditioner app
Controlling the air conditioner
Below are functions that you can control or monitor using the Wi-Fi adapter.
Category
Monitoring
Temperature control
Control
Direct/indirect wind
• Available features may differ depending on the model.
NOTE
• Some features may not be available according to the specifications of the indoor unit.
• For more information about the SmartThings app, details can be found in SmartThings app.
20
Function
Desired Temp
Current Temp
Filter warning
Defrost
Energy monitor
Power supply
Operation mode
Fan speed
Air flow direction
Wind-Free
Long
Clean
Motion detection
Ionizer
Reset Filter
Ventilation
Hot water
Displays the desired temperature.
Displays the current temperature.
An alert is generated after the filter time elapses.
Appears in the defrost state.
Displays the power usage on the daily/weekly/monthly basis.
Turn on or off the air conditioner.
Select the desired operation mode.
Adjust the desired temperature.
Adjust the desired fan speed.
Adjust the desired air flow direction.
Enables/disables the Wind-Free function.
Enables/disables the Long function.
Enables/disables the Clean function.
Enables/disables the motion detection function.
Select any of direct wind and indirect wind while in motion
detection.
Enables/disables the Ionizer function.
Upon a filter alert, you can initialize the filter reset time.
Enables/disables the Ventilation.
Enables/disables the Hot water function.
Description
Advertisement
Table of Contents
