Samsung Wi-Fi Kit 2.0 MIM-H04AN User & Installation Manual page 13

• A single Wi-Fi Kit can be connected to 16 indoor units at most.
• You can rename each Wi-Fi Kit via a smartphone.
However, you cannot change the names for other smart phones connected to the same Wi-Fi
NOTE
adapter.
2. Use the Wi-Fi Kit settings on the dedicated installation program (S-NET pro 2) to set the tenant addresses
for each Wi-Fi Kit.
②
③
④
1) Press the [Search] button to find the connected Wi-Fi Kits.
2) One by one, select the MAC address for each Wi-Fi Kit from the list.
- You can see the MAC address on the label inside the Wi-Fi Kit.
3) Set the tenant address. (Unavailable, 0-F)
- Seeing the table below, enter the tenant address on the S-NET pro 2.
Tenant address
Unavailable
0
1
2
3
4
5
6
7
8
9
①
MAC: XXXXXXX
Group channel address for the indoor units controlled by a Wi-Fi Kit
Controls all indoor units connected to the outdoor unit
Controls the indoor units with the group channel address "0"
Controls the indoor units with the group channel address "1"
Controls the indoor units with the group channel address "2"
Controls the indoor units with the group channel address "3"
Controls the indoor units with the group channel address "4"
Controls the indoor units with the group channel address "5"
Controls the indoor units with the group channel address "6"
Controls the indoor units with the group channel address "7"
Controls the indoor units with the group channel address "8"
Controls the indoor units with the group channel address "9"
13