Table of Contents
Advertisement
WiebeTech LLC
Hardware Installation
Install the RedPort write-blocking host adapter and attach your Fibre Channel devices to it using the
instructions below.
Package Contents
The RedPort host adapter package contains the host adapter card and a CD containing drivers, user
manuals, and warranty information.
System Requirements
To install and use RedPort card you will need:
•
A computer with an available x4 PCI Express (PCIe) expansion slot or larger, such as x8 or x16.
•
An operating system supported by the card's drivers. See Technical Specifications for a list of
supported operating systems.
Fibre Channel address
RedPort host adapters are configured with a unique address designated by the Institute of Electrical and
Electronic Engineers. The WorldWide Port Name (WWN) and Node Name are the two components of the
address assigned to Fibre Channel products. This address, stored in flash memory, allows the system to
recognize the host adapter as a unique part of your configuration. The address is clearly marked on the
back of the board for easy identification. Please keep a reference copy of the number in a safe place or
write in the space provided on this page.
FC host adapter WWNs are assigned for each channel. The WWN listed on your host adapter is assigned
to the first channel (0). Sequential WWNs apply for additional channels.
WWN 0: all adapters
WWN 1: RedPort FC
Installation Steps
1.
Power down the computer and unplug the computer from all power sources.
2.
Open the case.
3.
Install the RedPort host adapter in any open PCI Express (PCIe) expansion slot (4x, 8x, or 16x). If you
have questions about how to install an expansion card in your system, consult your computer's
documentation.
4.
Connect Fibre Channel devices by inserting a Fibre Channel cable from the devices to the connectors
on the host adapter until you hear a click.
5.
Close the case on the computer and power it up.
R e d P o r t S C S I U s e r ' s M a n u a l
WARNING: RedPort host adapters contain c
that are sensitive to electrostatic discharge (ES
can cause damage to the host adapter. Please follow
standard methods to avoid ESD.
WARNING: Remember to back up
your system data before changing
or installing hardware.
omponents
D). ESD
- 4 -
Advertisement
Table of Contents
