Indoor/Outdoor Thermo-Hygrometer, 8 Channel (Optional) - Ambient Weather WS-290D Quick Setup Manual

Table of Contents

WH31PF

(*) The WH31E, WH31PF and WH31P share the same 8 channels.

Note: Optional sensor data is not displayed on the console; the data only passes through to the Ambient Weather

Network dashboard and cannot be calibrated.

12.3 Indoor/Outdoor Thermo-Hygrometer, 8 Channel (Optional)

The WS-2902D supports up to 8 additional Thermo-Hygrometer sensors, and the console receives and sends this data

directly to the Ambient Weather Network. (WH31E, WH31PF and WH31P share the same 8 channels). The data is

not displayed on the console (pass-through only) and cannot be calibrated.

Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for outdoor temperature ranges

between -4 °F and 140 °F and fresh lithium batteries for outdoor temperature ranges between -40 °F and 140 °F.

1. Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as shown in Figure

2 .

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter.

3. Channel Number: The WS-2902D supports up to eight transmitters. To set each channel number (the default is

Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure 3.

4. Temperature Units of Measurement: To change the units of measurement on the transmitter display (°F

vs. °C), change Dip Switch 4, as referenced in Figure 3.

Version 1.29

8* Floating Pool Thermometer

Figure 2

Page 24

Table of Contents