yuna CALOR EBK4-2B G Instruction Manual page 23

5. Touch the sensor button of the
to represent tens digit will flash.
6. Set he desired dozens of minutes using the + and - sensor.
➢ Touch + or - once to increase / decrease the value by 1
minute.
7. When you have finished the setting, the count-down of the
set time starts. The display indicates the remaining time.
8. To indicate which cooking zone (upper / lower cooking
zone) has been enabled a red dot next to the
goes on.
THE TIMER
7. When the set time has elapsed, the relevant cooking zone is
switched off automatically.
If you want to change the setting after programming, you have to start at step 1 again.
WARNING!
Oher cooking zones will keep operating if they have been turned on previously.
D
EACTIVATING OF THE
1. Touch the -
SENSOR
2. The is deactivated when the display indicates
TIMER FUNCTION
-00-.
again, then the number
TIMER
to set the remaining time back to 0.
INDICATOR OF
T F :
IMER UNCTION
00
22