Table of Contents
Advertisement
WARNING!
Never touch the cooking zones while the residual heat indicator is still on. RISK OF BURNS!
When the power is on, a beep sounds once; all indicators displays "
"
"
. Now the appliance has entered the stand-by mode.
1
1. Touch the O
/ O
N
2. The display indicates
3. Place a proper cookware on the
ways keep the bottom of the cookware as well as the cook-
ing zone clean and dry.
4. Select the desired cooking zone by touching the
sensor. The indicator flashes for 5 seconds.
COOKING ZONE
5. Set the power level using the + and - sensor.
➢
Each cooking zone is equipped with 9 power levels (1 - 9)
6. When you do not set a power level within 1 minute, the appliance will switch off
automatically. You have to start at step 1 again.
7. While cooking, the power level can be changed at any time.
Depending on model
1
3.5 How to start cooking
sensor
FF
.
DESIRED COOKING ZONE
" or
. Al-
SELECTION OF
1 - 9
18
Advertisement
Table of Contents
