Table of Contents
Advertisement
A (mm)
Wall Cupboard
min. 450 mm
Extractor hood
min. 650 mm
The top closing edge of the cabinet (1) must not be flush with the installation opening
(2). Install the closing edge in offset positioning (1) or bevel the closing edge (3).
X
min. 150 mm
WARNING!
The safety distance between the hob and a cupboard above should be at least 760
1. Before installing the hob to the worktop, the adhesive seal has to be fixed on the bot-
tom edge of the hob properly.
The seal has to be fixed properly. The outer side of the seal must match the bottom
outer edge of the hob (s. fig. below). The seal must be fitted tightly on the bottom
edge of the hob (no overlaps, no gaps etc.) to prevent liquids etc. from entering the
installation opening subsequently.
B (mm)
C (mm)
min. 50
min. 20
mm.
I
NSTALLATION OF THE HOB
D
E
Air inlet
Air outlet 5mm
Y
min. 20 mm
:
11
Advertisement
Table of Contents
