Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 90

Using the i.LINK Control Panel
After you select an i.LINK device using the Device List, the TV
displays the i.LINK Control Panel, which al!ows you to use the TV's
remote to control the selected i.LINK device.
1
If the i.LINK Control Panel is not already disphyed, press i.I_INK
on the remote control.
(not the i,LiNK device), then the Device List wi[[ appear. Se!ectthe desired
device fromthe list and press_ t0 display t heControl Panel.
2 Move the remote control's joystick 4, € € € to navigate through
the options aw_ilable in the i.LINK Control Panel.
3 Press _ to select a desired option.
4 Press i.LINK to exit the Control Panel and view the iLINK device
fulbscreen.
The DW window appears only if the
i.LINK Menus were entered while
watching a digital TV channel
The i.LINK Control Panel displays the signal from the TV to the left
(if available), _wtd the signal from the currently selected device to the
right.
89