Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 119

Video
No picture _ If your TV does not tunr on, and a red light keeps flashing, your TV may
(screen not lit), no sound need service. Call your local Sony Serx ice Center.
Make sure the power cord is plugged in.
Press the POWER button on the front of the TV.
Press the IV/VDE0 button to cycle through the, connected video sources.
Try another channel; it could be, station trouble,
Dark, poor or no _ Adjust the Picture option in the Video Menu (see page 94).
picture (screen lit), _ Adjust the Brightness option in the Video Menu (see page 94).
good sound _ Check the antenna/cable connections.
No color _ Adjust the Color option in the Video Menu (see page 94).
Only snow and noise _ Check the antenna/cable connections.
appear on the screen _ Try another channel; it could be, station trouble.
.... _ Press ANT to change the input mode (see page 48).
Dotted lines _ Adjust the antenna.
or stripes _ Move the TV away from noise sources such as cars, neon signs, or hair-
dryers,
problem.
Bla( k box} ............... on scr_n DJ .......................... You have selected a text .................. option in the ................................. _etklp M_lrL_ and ................... no tff_xt 18 . ... available. ....
(See page 105 to reset Setup selections.) To turn off this feature, set the
Caption Vision option to Off. If you were trying to select closed captioning,
select CC1 instead of TEXT 1-4.
Bars appear at the _ Some wide-screen programs are filmed in aspect ratios that are greater
top and bottom of the screen than 16:9, such as 2.35:1. (This is especially common with theatrical
releases). Your TV will show these programs with bars at the top and
bottom of the screen. For more details, check the documentation that came
with your DVD (or contact your program provider).
General
How to reset TV to _ Turn on the TV. While holding down the RESET button on the remote
factory settings contro!, press the POWER button on the TV. (The TV will turn itself off, then
back on agahr.) Release the RESET button.
How to restore Video settings _ Press the RESETbutton on the remote control while in the Video Menu (see
to factor)." settings page 94).
How to restore Audio _ Press the RESET button on the remote control while in the Audio Menu (see
settings to factory settings page 97).
Cannot cycle through the _ Be sure the Video Label option is not set to Skip (see page 105).
other video equipment
connected to the TV
Cannot operate Menu _ If a Menu option appears in gra}, this indk:ates that the TV is in a state in
which the Menu option is not av _ilable.
Lost password _ In the password screen (see page 102), enter the following master
password: 4357. The master password clears your previous password; it
cannot be used to temporarily unblock channels.
118