Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 107

Normally, Tilt Correction
and Vertical Correction only
need to be adjusted the first
time you turn on the unit and
after the unit is moved to a
new Iocation,
[]lf a CableCARD is
inserted, the bLINK Standby
Off setting uses the same
amount of power as the
bLINK Standby On setting.
Tilt Correction Allows you to correct any tilt of the picture.
Move the }oystick _, or ._ to choose a correction between
+7 and -7 and press (_.
Vertical Correction Allows }..octto make a vertical correction to the picture.
Move the ioystick t1"or _"to choose a correction between
+5 and -5 and press _.
Language Select to display al! on-screen Menus in your language of
choice.
i.LINKStandby On Allows the i.LINK signal to p_ss through
to connected i.LINK devices e_en when
the TV is turned off. The front panel
i.LINK Standby LED shows orange. The
TV uses more standby power than when
this option is set to Off.
Off Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the TV is turned off. The front panel
i.LINK Standby LED shows red. The TV
uses less standby power than when this
option is set to On.
Menu Color Enables you to select a specific color for the on-screen
nlenus.
Programming
Caption Vision
If you selected the Programoption under CaptionVision(see page 105),
you can change the following settings:
options.
CC1, CC2, Displays a printed version of tire dialog or
CC3, CC4 sound effects of a program. (Should be set
to CC1 for most programs.)
Text1 ,Text2, Displays network/station information
Text3,Text4
presented using either half or the whole
screen (if avaihble). For closed captioning,
set to CC1.
Advanced Allows you to select adv_mced digita! (EIA-708) closed
caption options. Select from the available options.
Override Allows you to "force" the close captioning to analog (EIA-
608). This setting is in effect only until you change
channels, inputs, or turn off the TM
Set to On or Off.
106