Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 118

MPEG1 movie does not CI Some variations of MPEG1 movies 1T[aynot be compatible with the
play back correctly Memory Stick Viewer.
MPEG1 quality is poor when _ The, quality of the movie when enlarged depends on the resolutiorL of the
erdarged (page 79) MPEG1 file. See your camera's instruction manual for details.
Error message CI No Memory Stick There is no Memory Stick in the slot.
is displayed _ Memory Stick The lock mechanism on tire Memory Stick is
Locked engaged.
CI Memory Stick Error The Memory Stick in the slot might be damaged;
ttT a different Memory Stick.
CI Format Error The Memory Stick may have been formatted using
a PC or other device that is not compatible with
cameras.
Error icon is displayed The file is not a valid MPEG1 or JPEG format.
The thumbnail is not DCF-compatible.
The file is a JPEG or an MPEG1, butt the thumbnail
is unreadable.
The file isunreadable.
Audio
Good picture, _ Press MUTINGso that the word Muting disappears from the screen (see page
no so und 48).
Make sure the Speaker option is set to On in the Audio Menu (see page 98).
Make sure the MTSoption is set to Stereo or M0n0 (see page 97).
Cannot gain enoutgh volume _ Increase the volume of tire cable box using the cable box's remote control.
when using a cable box Then press TV FUNCTION and ad}u st the TV s volu me.
Sound seerns weak or _ The TV's audio might be set to Auto SAPor M0n0, when it might be better set
insufficient to Stereo. Lr the Audio Menu
(see
page 97), set the MTSsetting to Stereo. If
already set to Stereo, switch to M0n0 (which may reduce background noise
........................... during x_e!!k s!ere° broadcast@ ..........................................................................
Cannot raise the volume on _ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
externa! audio speakers order to outtput the sound to your audio system) use your audio receiver to
adjust the sound (see page 97). Or, to use the TV remote contro!, set the
Audio Out option to Variable.
To turn on the TV speakers, set the Speaker option to On (see page 97).
117